865棋牌游戏

电话Service Hotline

13822743755

Home > News Center > Content

Company's Products

Zhongshan Electromechanical Equipment Co., Ltd.
Contact Person: Mr. Chung
Tel: 13822743755
Company Landline: 0760-88503755
Company Fax: 0760-88503735
E-mail:553657427@qq.com
Address: No. 31st, Zhongshan Street, Dongsheng town

Sealing test Scheme and test instrument of plastic bottle leak detector
Edit:Zhongshan Electromechanical Equipment Co., Ltd.   PublicDate:2019-01-07

    Plastic Bottle Bag MachineIt is understood that the sealing of plastic bottle caps, such as food and beverage caps, is very important for the protective effect of products, can effectively ensure the validity period of food, and its safety and health. Plastic anti-theft bottle cap is required to facilitate the opening of consumers, but also need to avoid due to poor sealing performance caused by leakage problems. How to use the professional sealing tester to control the sealing performance of the CAP is the focus of the production unit online or offline detection.


For plastic anti-theft bottle caps, because to test its sealing degree, so to use the positive pressure sealing tester. National standard gb/t17876-1999 specifically for this plastic anti-theft bottle cap opening torque force, thermal stability performance, sealing detection and other issues have been clearly defined.Plastic Bottle Conveyor BeltIt is understood that sealing performance and bottle cap opening, torsional torque evaluation is an effective way to solve the sealing performance of plastic anti-theft bottle cap. Depending on the use of the CAP, there are different requirements for measuring methods that do not contain gas caps and gas caps. Gas cover does not contain the CAP to cut off the anti-theft ring (strip), for not less than 1.2NM of rated torque seal, with a sealing tester test.


865棋牌游戏The test principle is: pressurized to 200kPa, under water to maintain pressure for 1 minutes, observe whether air leakage or buckle, the gas cover is pressurized to 690kPa, under water to maintain pressure for 1 minutes, observe whether air leakage, and then increase the pressure to 1207kPa, keep the pressure for 1 minutes, observe whether the cap is unbuttoned。


R & amp; D of mfy series positive pressure sealing Tester specializes in a variety of threaded caliber 28mm, 38mm standard plastic anti-theft bottle (gas cover and non-gas cover) leakage and sealing performance of the quantitative determination, but also on the cap Torque sealing index, cap connection buckle strength and the entire bottle sealing, compressive resistance, The anti-breakage and other indicators are evaluated and analyzed. Equipped with a special "plastic anti-theft bottle seal Performance test Device", as shown in the figure. The plastic burglar cap is encapsulated with a special connection unit link and placed in a transparent observation tank,Plastic Bottle Testing MachineIt is understood that when the test conditions such as test pressure or leakage are set to start the test, the instrument automatically performs the test, the test pressure and leakage amount and other test data can be displayed directly on the LCD LCD screen. It can also be judged by the bubble condition in the transparent observation tank.

The sealing performance of plastic anti-theft bottle cap is the main factor affecting packaging leakage and product spoilage, and the reasonable control of sealing performance by racing Mfy CAP SEAL Tester can ensure its good opening performance and avoid the generation of leakage.


内蒙古快3开奖结果 广东快乐十分APP下载 内蒙古快3开奖结果 秒速快3 内蒙古快3开奖结果 幸运赛车人工计划 广西快乐十分APP下载 幸运赛车平台 广西快乐十分软件下载 865棋牌